Digital water TDS meter tester/TDS-3 meter

1.Easy to read digital 2.Applicable for water temperature test 3.LCD 4.Hold TDS digital after testing 5.CE certification

TDS-3 technical parameter:

Range: 0--9990ppm; 0--99°C; 32--212°F

Resolution: 1ppm(mg/L)

Accuracy: ±2% Full Scale; ±1°C ; ±2 °F

Calibration: Factory Calibrated

Auto shut-off: 10minutes

Temperature Compensation: Automatic

Operating Temperature: 0°C to 50 °C

Power source:2*1.5V (button cell)

Dimensions: 156*30*20mm

Weight: 50g

  

OPERATION

1: Remove the protective cap.

2: Turn the meter ON sliding the switch on the top

3: immerse into solution up to the max immersion level without touching the bottom of the beaker

4: Stir gently and wait until the display stabilizes.Readings are automatically compensated for temperature variations.Once the readout stabilizes(10-30 seconds),press the HOLD button to view out of water.

5: After usage,shake off the water from your tester or wipe it with a tissue.

BATTERY REPLACEMENT

when the meter cannot be switched on or the display fades,pull out the battery compartment and replace all two 1.5V batteries,

while paying attention their their polarity.

batteries should only be replaced in a safe area using the battery type specified in this instruction manual.  

Digital water TDS meter tester/TDS-3 meter